Anyone looking for a 3D printable case for the T-Deck uLisp Machine might be interested in this on Thingiverse:
Lilygo TDeck Shell: https://www.thingiverse.com/thing:6131064
Has anyone tried it?
3D printable T-Deck case
andreer
#2
Just printed the first part, not the exact same but a remix (by bmidgley) as I wanted the trackball to be accessible. It is pretty thick, I hope I can make something thinner later on or at least round off the edges to make it nicer to hold. Will report back once I have tested the full case.
andreer
#3
So I have it fully printed now but I don’t love it. I think the design by Lilygo looks more promising: https://github.com/Xinyuan-LilyGO/T-Deck/tree/master/shell
I will try to print this, probably next week, by converting from the step files and let you know how it works out.
nanomonkey
#5
I have been using the one you link to @johnsondavies. I don’t love it, as it doesn’t have much space for a lipo battery and doesn’t click together, but it does work with a bit of glue or tape.
I found the rollerball to be highly unusable, so covering that up was a non-issue. I use the touch screen only.
Yes, I gave up trying to get any sense out of the trackball.
By the way, someone has raised an issue about problems trying to use the case design on GitHub:
andreer
#7
After picking up my t-deck again I’ve found that print files for an excellent case are now available: https://www.printables.com/model/741124-lilygo-t-deck-td1-case-by-alley-cat
Putting the t-deck into the case is a tight fit and must be done with care, but it works a lot better than the ones I tried previously.
hasn0life
#8
Also the t-deck is available with a case now, in case people missed it https://lilygo.cc/products/t-deck-plus-1
Also the t-deck is available with a case now, in case people missed it https://lilygo.cc/products/t-deck-plus-1
An ominous statement on that page:
[Keyboard letter styles are sent randomly]
What does that mean?